ALZO Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment

Easy to install on a drop ceiling with 1-inch wide T-Bar frame, with scissor clamp and two (2) 8-inch aluminum suspension rods for 10 or 18 inch drop.2-axis locking tilt adjust with maximum 25 degrees pitch makes installation fast and stableMount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling;fits Epson, Optoma, Benq, Viewsonic and most other projectorsIncludes scissor clamp and 2 - 8-inch aluminum suspension rodsIncludes an American written installation manual with illustrations and photosThe projector is not included; it is shown for demonstration purposes onlyThis easy to install video projector mount can support up to a 20-pound projector from the T-Bar framing of a suspended drop ceiling. Projector drop from the ceiling is either 10 or 18 inches. Fits Epson, Optoma, Benq, Viewsonic and most other projectors.The maximum spider mount leg span is 12 inches (mount hole to mount hole); angling the legs will slightly reduce maximum leg span.The simple assembly includes all metal parts and a comprehensive kit of assembly screws and hardware. The two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. The suspension rod is either 8 or 16 inches long and the mounting bracket is Includes an American written installation manual.Video Projector is not included, it is shown for demonstration purposes.NOT COMPATIBLE WITH ViewSonic PJD7820HD projector.AccessoriesClick here for ALZO projector mount accessoriesManualALZO Suspended Drop Ceiling Projector Mount Installation Manual

• Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; fits Epson, Optoma, Benq, Viewsonic and most other projectors
• Easy to install on a drop ceiling with 1 inch wide T-Bar frame, with scissor clamp and two (2) 8 inch aluminum suspension rods; the two axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. With the typical drop ceiling, a medium to heavy projector a small amount of movement or sway will occur when touching the projector. We recommend using a remote control where possible. Using the included support wire will provide for a very safe install.
• Includes American-written installation manual with illustrations and photos; simple assembly includes all metal parts and comprehensive kit of screws and hardware
• The suspension rod is 8 or 16 inches long and the mount bracket is gunmetal gray; projector drop from the ceiling is either 10 or 20 inches
• Projector is not included, it is shown for demonstration purposes only; includes an installation guide (see link below under "Technical Specification")